home automation

Hi 👋, In this short article I will highlight how to use the BME680 Home Assistant integration with a BME680 Sensor. Please note that I’m running Home Assistant core on Raspbian OS. Raspberry Pi Setup Before connecting the sensor, you will need to enable the I2C interface on your Raspberry Pi and install some additional tools that are useful for debugging. To enable the I2C interface execute: sudo raspi-config Then go to Interfacing options->I2C and select yes....

Hi 👋 The purpose of this article is to get you started quickly with a Home Assistant on a Raspberry Pi. It’s a simple walkthrough on how to install Home Assistant and configure it so it will boot with your PI. I will use my old Raspberry PI V3 board. Flashing the Raspberry PI OS You will need a microSD card of reasonable size, I’m using a 16GB one and a USB Adapter to connect it with my PC....

Hello everyone! After following the /r/homelab reddit for a while I’ve decided to give it a try and make myself my own homelab environment. I don’t have access to expensive server equipment nor do I have the means to acquire it, so I will be using an old HP Laptop which has quite a few resources, it is a bit stronger than the average Raspberry PI. The laptop has 11GB of RAM memory, a 740GB disk and an Intel i7-4702MQ CPU....